PROBLEM
When applying an update to the Enterprise Server that includes adjustments to the Client software, the server will (by default) try to push the updated client software to all client computers. In environments with large numbers of client computers, or a network bottleneck between the server and clients (such as a WAN connection to another site) this can cause the network connection to become saturated.
For more information on the auto-update process, please see the System Engineering Guide (pg 53 in the current 6.0.2 guide).
ALTERNATE SOLUTIONS
1. The first alternate solution when auto-updating fails is to perform a manual update by copying the needed files to each client computer (Details can be found here). This is an easy process, but labor intensive. Only recommended in cases where network security or serious network bottlenecks are preventing updates to a small number of client computers.
2. For larger deployments it is possible to package the updated client software into a self-extracting archive which you can stage on the section of network needed, and execute using an administrative function. As you want this updater to run before any of the client software has launched, we recommend pushing the update as part of a logon script, or after hours. For instructions on creating this Update Package, see below.CREATING AN UPDATE PACKAGE
1. Install the service pack/fix pack on the CCM server
2. Create a folder structure which looks like this:
PFYRECCP
Applications
Services
3. If you go to [InstallDir]\CCM\Applications\ on the sever, you will find a folder with each of the following names. Copy these folders into \PFYRECCP\Applications\.
CCMWebStub
CcsClient
ContactCenterClient
EmployeePortalStub
FlexibleReporting
Ignite
MbgConnector
OutlookPlugin
SalesforceIntegration
YSE
4. Next, copy from [InstallDir]\CCM\Services\ the folder named UpdaterService and MiAudioEmulationServer into \PFYRECCP\Services\ .
5. You should now have the following folder structure:
PFYRECCP
Applications
CCMWebStub
CcsClient
ClientRole
ContactCenterClient
EmployeePortalStub
FlexibleReporting
Ignite
MbgConnector
OutlookPlugin
SalesforceIntegration
YSE
Services
UpdaterService
MiAudioEmulationServer
5. Create a batch file called setup.bat . The default configuration for a 32bit client is as follows:
net stop "updaterservice"
net stop "miaudioservice"
xcopy %TEMP%\PFYRECCP "%PROGRAMFILES%\PrairieFyre Software Inc\CCM" /s /c /h /e /r /k /y
net start "updaterservice"
net start "miaudioservice"
NOTE: There are a few considerations in how you create this batch file.
- If your clients have their Updater Service disabled already, you can remove the net stop and net start commands for updaterservice.
- The destination path may not be exactly as above. %PROGRAMFILES% will always take you to the \Program Files\ folder, however on a 64 bit client we want to install into \Program Files (x86)\ instead. The variable for this is %PROGRAMFILES(X86)%.
- If you have a mix of 32 and 64 bit client computers, this adds some confusion. You can either duplicate the XCOPY line into both locations (thus doubling the space used on the client computers), or you can create two separate packages for deployment (your administrative action will need to distinguish)
- In MiContact Center Verison 8.X a new install of the software will install to %PROGRAMFILES(X86)%\Mitel\MiContact Center\ instead. Check the installed path and adjust accordingly.
6. Copy the batch file into the root of the \PFYRECCP\ folder
7. Ensure that you have WinRAR installed on the server (you may be able to use other archiving tools, but the configuration below will need to be adjusted accordingly).
8. Right-click the \PFYRECCP\ folder and Add to Archive.
9. Check Create SFX Archive.
10. Click the Advanced tab at the top, then click SFX Options.
11. In the General tab, Path to Extract field input %TEMP% .
12. Click the Setup tab. In Run after extraction input %TEMP%\PFYRECCP\Setup.bat .
13. Click the Update tab. Under Overwrite mode select Overwrite all files .
14. Click OK.
15. Click the Comment tab at the top.
16. In here is a section to Enter a comment manually which will have the following auto-populated:
;The comment below contains SFX script commands
Path=%TEMP%
Setup=%TEMP%\PFYRECCP\Setup.bat
Overwrite=1
17. Add a new line below Overwrite=1 that says Silent=1 . It should now look like the following:
;The comment below contains SFX script commands
Path=%TEMP%
Setup=%TEMP%\PFYRECCP\Setup.bat
Overwrite=1
Silent=1
18. Click OK.
19. Deploy the PFYRECCP.EXE file using your administrative tools. Note that it must be run while none of the software being updated is active. Deploying as part of a login script is recommended.
NOTE: Although the archive unpacks silently, the batch file does not. Users will see a command prompt pop up, a list of files fly by, and then the command prompt will close when it’s finished. The process is complete as soon as the command prompt closes.
APPLIES TO
MiCC, 7.X
Keywords: manual update client component pack administrative package howto how to